Pak reflective ground cover is made of white polypropylene which reflects light to aid in plant photosynthesis and reduce heat build up. The fabric is U.V. stabilized, abrasion resistant, and is permeable to both air and water. The additional light also deters insect from hiding on the underside of leaves. For indoor use only.

• Reflects light for more photosynthesis
• Helps reduce structure heat build up
• Water and air permeable
• Mildew resistant
• TRUCK SHIP ONLY

There is an added charge if order is not $200.00 or more - 27-8011-1

In order for the customer to obtain the most economical price per square foot of fabric, all fabrication charges are optional and not built into the price per square foot as many competing products.

Please Read Before Ordering Pak Products

1. Any time an order is placed needing a different width than multiples of standard widths, the price per panel will be calculated based on the standard widths used to fabricate the needed panel width. Example: a panel 17’ x 100’, 47% shade would require the fabrication of 6’ & 12’ standard panels or 1,800 sq. ft. usage-100 sq. ft. would be off fall (wasted).
2. Always allow ±1” differential between panel width ordered and the fabricated panel width. For length, allow ±1% (normally on the + side).
3. Allow 2” seam loss when figuring width, when 2 panels are sewn together.
4. To calculate the amount of grommets needed per panel, add total linear feet of taped edges, which are required for grommet fabrication, divide by spacing of grommets, add 4 more for total needed. Two grommets installed on each corner.
5. It is suggested fabric requiring slitting be hemmed or taped on edges to prevent unraveling.
6. For greater longevity of fabricated fabrics, all PAK products are sewn with monofilament thread and spread grommets.
7. As lead times can vary greatly, please order in advance of need.