The POPagation Station™ Plug Popper custom made by T.O. Plastics dislodges fully rooted plugs from plug trays to minimize damage when transplanting. This two-piece system contains a base board and a spring-actuated stabilizer frame. The base board is custom built with hardened steel pegs and can function as a dibble board for seeding. Materials can easily be sterilized. Labor and time savings with transplanting efficiency.

• Spring-actuated stabilizer frame with upper and lower support ribs.
• Materials can be easily sterilized.
• Base board also functions as dibble board for seeding.
• Minimize damage when transplanting from plug trays to containers.
• Cost effective equipment for growers.
• Portable transplanting system to go from greenhouse to field.
• Easy to store when not in use.
• Requires less force than other plug poppers on the market!

How to use:

1. Slide base board into bottom plate of frame from either side (right or left).
2. Align (4) holes in base board with (4) dowel pins in bottom plate.
3. Lock base board into place by rotating (4) turn latches.
4. Align lower support rib to center and upper support ribs between cells of plug tray.
5. To adjust lower support rib, loosen thumb screws and slide to center of plug tray. Tighten to hold in place.
6. To adjust upper support ribs, loosen the thumb screws and slide to align between cells of plug tray. Tighten to hold in place.
7. Slide plug tray into top plate between upper and lower support ribs from frame front.
8. Using both handles, press top plate down to allow base board pins to penetrate drainage holes of plug tray to dislodge plugs from bottom of tray.
9. Release pressure on handles to return top plate to resting position.
10. Slide plug tray out of frame front.
11. Remove excess soil and plant debris after use.

*Frame and base board sold separately